How to clean an objective
- Very small amounts of dust/dirt can make images substantially worse
- It is important to remove the oil after use (Oil traps dirt and actually slowly dissolves the glue in objectives)
- Be careful cleaning as the process could damage the objectives if done badly - remember they cost $500 to $12,000 each - be gentle and don't use too much of any cleaning liquid
- Never use kim wipes on an objective (the fibers are very coarse)
If you have used an oil objective you need to remove the oil when you have finished. Use lens paper to remove the oil (try and mop it up rather than spread it out). Don't over do that though as rubbing the objective when it is completely dry might scratch it (even if you are using lens paper).
There are lots of solutions that can be used to clean objectives. It's a good idea to use two types - one for dissolving water-insoluble dirt, and one for dissolving water-soluble dirt. 70% ethanol works well for the first type (100% evaporates too quickly, and many other solvents are toxic and may actually dissolve the cement of the objective). A dilute detergent is good for the water-soluble dirt. We use 0.5x sparkle, a household detergent that doesn't have an ammonia. There are bottles of both around the scopes.
Objective: Clean up 15 pieces of paper on the Neighbor's yard. Objectives are precision pieces of microscope equipment, so they must be cleaned to ensure proper optical performance. Despite this, researchers and lab technicians often forget to clean their immersion oil objective lenses—and end up facing some sticky consequences. Today, we will provide six tips to properly clean oil off your objective lens. Objective—Clean linens (2009 FDA Food Code 4-801.11). Clean linens must be free from food residues and other soiling matter. Statutory Authority: RCW 43.20.050 and 43.20.145.
General procedure for cleaning an objective:
- Remove oil with lens paper
- 70% ethanol on cotton-tipped applicator
- Sparkle on cotton tipped applicator
- Distilled water (or breathe on the objective), wipe gently with lens paper
It's a good idea to try and clean objective, and optics in general, in a spiral pattern:
Cleaning other things
Eyepieces also get dirt on them. It's easy to clean them with a cotton tipped applicator soaked in 70% ethanol.
Slides: It's a good idea to make sure your slides are very clean also. It is often worth carefully wiping the coverslip with a cotton-tipped applicator soaked in 70% ethanol.
Zeiss have produced a nice guide: The Clean Microscope (744.39 kb pdf)
Gyrene specializes in engineering innovative solutions for medical and humanitarian teams, forward-deployed operators, and remote location specialists around the world. We design integrative systems that support resiliency, self-reliance, and decentralized operations.
Aim Cleaner
Objective Cleaning Services
Clean drinking water is life changing, even lifesaving in challenging situations. We engineer our products for just that purpose… to save lives in extreme environments. Gyrene solutions are durable, smart, and multifunctional. Designed by veterans for the battlefield, the Mangrove creates clean drinking water from thin air, saltwater, or contaminated water. It also provides 12 kW of back-up power to keep the mission moving forward.